Phrozen ABS-Like Resin: Matte Gray (500ml)

Phrozen ABS-Like Gray is a great resin for highly detailed prints. The matte light gray color is perfect for viewing, post processing and painting.

Perfect, easy-to-use resin for Phrozen Transform.

Specifications
Volume: 5KG Container
XY Planar Resolution: 50 micron
Z Resolution (Layer Height): 30-100 micron
Property: High hardness, toughness and resolution.
Way to Rinse：Clean with alcohol spray with air gun
Suitable for: LCD 3D Printer
Application: General modeling & prototyping
Viscosity: 67 cps
Density: 1.10 g / cm3
Tg: 70 degree Celsius
Break value: 10 MPa
Tensile Modulus: 1050 MPa
Hardness: Shore 76D
Elongation: 3 %
I-Zod Impact: 1.44 KJ/m2

Operating Instructions
We suggest using resin and printer indoors under well-ventilated conditions.
Avoid exposure to sunlight and indoor luminescence.
Please preserve our resin in closed opaque bottle to avoid exposure to air.
Do not mix used and non-used resin together.
Please keep the resin away from kids.
Do not dump resin. Please cure resin and treat/recycle it as general plastics garbage.

Safety
Do not eat or swallow the resin. Go to hospital if necessary.
Wear goggles to avoid eye contact with resin. Wash your eyes with water and go to hospital if necessary.
Resin might cause slight irritation to skin. Wear gloves when handling. Stop using if an allergic reaction occurs.
Resin has a slight odor. We strongly suggest you use it under ventilated conditions.
Suggested safety equipment: gloves, mask, goggles, and lab coat.
Keep resin in room temperature (15 – 35 OC) and dry condition.