Model Trimmers

<ul> <li>3/4 HP Motor (110 Volts or 220 Volts)</li> <li>12" Coarse Diamond and Fine Carborundum wheel</li> <li>Electric Water Control Valve</li> <li>•&nbsp;Squaring and angulation tools</li> <li>• Diamond 12" course wheel</li> <li>•&nbsp;3/4 HP motor</li> <li>•&nbsp;Built-in water spray system</li> <li>• Electric water valve</li> </ul><div>21.5"W x 18"D x 15.5"H<br /> (55cm x 46cm x 40cm)</div><div>Wheel size = 12" x 1" x 3/16"</div><div>&nbsp;</div><div>Our most popular DUAL Wheel trimming package!&nbsp; Reliable horsepower coupled with diamond cutting technology on the coarse wheel side provides 30-40% faster trimming.</div>

<p>#WONF-B Wonderfill</p><p><br /> This pre-mixed Wonderfill saves time and produces an excellent model and fill in bubbles and air pockets. Wonderfill also holds up under heat, is water soluble and requires no clean up.</p><p>&nbsp;</p><p>&nbsp;</p>

<div> <p>Quality crafted, easy-to-use Whip Mix model trimmers provide excellent cutting action to produce consistently attractive casts.</p><p>Available in a <strong>10″ or 12″ size</strong>, all units are constructed of rigid cast aluminum housings and backing plate, and are shipped completely assembled for immediate use.</p><p>The <strong>12″ model&nbsp;</strong>features a fully adjustable work table with angle ranges from 85 degrees to 120 degrees from the grinding wheel surface. A hinged front cover, held by a single wing nut, allows easy access to change or reverse the abrasive wheel. A full radius water supply provides effective abrasive surface cleaning, while removable clean-out plugs provide access for general cleaning. Unit measures 16″ wide x 17″ high x 15″ deep and comes with a coarse abrasive wheel (40.5 cm x 43 cm x 38 cm).</p><p>The <strong>10″ model</strong> offers a two-position work table and many of the same general features but in a more compact size and at a lower price.&nbsp; The 10″ model trimmer requires a space of only 14″ wide x 16″ high x 15″ deep and comes with a coarse abrasive wheel (35.5 cm x 40.5 cm x 38 cm).</p><p><em>*<strong>Accessories Include:</strong> Electric Water Valve, Water Spray Attachement and Splash Shield</em></p> </div><div> <h3>Technical Specifications</h3><dl> <dt>Dimensions</dt> <dd>16"W x 17"H x 15"D</dd> <dt>Weight</dt> <dd>19.3 kg (42.65 lbs.)</dd> <dt>Voltage</dt> <dd>115V/60Hz</dd> <dt>Amperage</dt> <dd>4A</dd> <dt>Drive Motor</dt> <dd>1/3 HP</dd> <dt>Warranty</dt> <dd>3 years parts and labor (US &amp; Canada Only)</dd> </dl> </div>

<div> <p>Quality crafted, easy-to-use Whip Mix model trimmers provide excellent cutting action to produce consistently attractive casts.</p><p>Available in a <strong>10″ or 12″ size</strong>, all units are constructed of rigid cast aluminum housings and backing plate, and are shipped completely assembled for immediate use.</p><p>The <strong>12″ model&nbsp;</strong>features a fully adjustable work table with angle ranges from 85 degrees to 120 degrees from the grinding wheel surface. A hinged front cover, held by a single wing nut, allows easy access to change or reverse the abrasive wheel. A full radius water supply provides effective abrasive surface cleaning, while removable clean-out plugs provide access for general cleaning. Unit measures 16″ wide x 17″ high x 15″ deep and comes with a coarse abrasive wheel (40.5 cm x 43 cm x 38 cm).</p><p>The <strong>10″ model</strong> offers a two-position work table and many of the same general features but in a more compact size and at a lower price.&nbsp; The 10″ model trimmer requires a space of only 14″ wide x 16″ high x 15″ deep and comes with a coarse abrasive wheel (35.5 cm x 40.5 cm x 38 cm).</p><p><em>*<strong>Accessories Include:</strong> Electric Water Valve, Water Spray Attachement and Splash Shield</em></p> </div><div> <h3>Technical Specifications</h3><dl> <dt>Dimensions</dt> <dd>16"W x 17"H x 15"D</dd> <dt>Weight</dt> <dd>19.3 kg (42.65 lbs.)</dd> <dt>Voltage</dt> <dd>115V/60Hz</dd> <dt>Amperage</dt> <dd>4A</dd> <dt>Drive Motor</dt> <dd>1/3 HP</dd> <dt>Warranty</dt> <dd>3 years parts and labor (US &amp; Canada Only)</dd> </dl> </div>

<div><p>This innovative Wet Model Trimmer was designed with power, performance and safety in mind. Engineered for heavy-duty use, the 3/4 HP wet trimmer operates at a full 1800 RPM.</p><p>Designed for the professional lab, this unit offers many unique features.</p><p><strong>Special features include:</strong></p><ul><li>Self cleaning design flushes slurry from unit, preventing stone or plaster build-up</li><li>Easy to open, single clasp door</li><li>Electric Water Valve</li><li>Splash Shield</li><li>Water Spray Attachment</li></ul><p><strong>Safety features include:</strong></p><ul><li>Enclosed motor</li><li>Special “trip-to-off” safety switch, shuts off motor if the door is opened during operation or in the event of a power failure.</li><li>Waterproof on/off switch.</li></ul><p>High-powered for high performance, the 3/4 HP Wet Model Trimmer will withstand years of rigorous use.</p><p>*Also Includes: Electric Water Valve, Splash Shield and Water Spray Attachment.</p></div><div><h3>Technical Specifications</h3><dl><dt>Dimensions</dt><dd>15"W x 15.25"H x 19"D</dd><dt>Voltage</dt><dd>115V/60Hz</dd><dt>Weight</dt><dd>28.3 kg (62.45 lbs)</dd><dt>Amperage</dt><dd>4A</dd><dt>Drive Motor</dt><dd>1,800 RPM 3/4HP</dd><dt>Warranty</dt><dd>3 year parts and labor (US & Canada Only)</dd></dl></div>

<div><p>This innovative Wet Model Trimmer was designed with power, performance and safety in mind. Engineered for heavy-duty use, the 3/4 HP wet trimmer operates at a full 1800 RPM.</p><p>Designed for the professional lab, this unit offers many unique features.</p><p><strong>Special features include:</strong></p><ul><li>Self cleaning design flushes slurry from unit, preventing stone or plaster build-up</li><li>Easy to open, single clasp door</li><li>Electric Water Valve</li><li>Splash Shield</li><li>Water Spray Attachment</li></ul><p><strong>Safety features include:</strong></p><ul><li>Enclosed motor</li><li>Special “trip-to-off” safety switch, shuts off motor if the door is opened during operation or in the event of a power failure.</li><li>Waterproof on/off switch.</li></ul><p>High-powered for high performance, the 3/4 HP Wet Model Trimmer will withstand years of rigorous use.</p><p>*Also Includes: Electric Water Valve, Splash Shield and Water Spray Attachment.</p></div><div><h3>Technical Specifications</h3><dl><dt>Dimensions</dt><dd>15"W x 15.25"H x 19"D</dd><dt>Voltage</dt><dd>115V/60Hz</dd><dt>Weight</dt><dd>28.3 kg (62.45 lbs)</dd><dt>Amperage</dt><dd>4A</dd><dt>Drive Motor</dt><dd>1,800 RPM 3/4HP</dd><dt>Warranty</dt><dd>3 year parts and labor (US & Canada Only)</dd></dl></div>

<div><p>This innovative Wet Model Trimmer was designed with power, performance and safety in mind. Engineered for heavy-duty use, the 3/4 HP wet trimmer operates at a full 1800 RPM.</p><p>Designed for the professional lab, this unit offers many unique features.</p><p><strong>Special features include:</strong></p><ul><li>Self cleaning design flushes slurry from unit, preventing stone or plaster build-up</li><li>Easy to open, single clasp door</li><li>Electric Water Valve</li><li>Splash Shield</li><li>Water Spray Attachment</li></ul><p><strong>Safety features include:</strong></p><ul><li>Enclosed motor</li><li>Special “trip-to-off” safety switch, shuts off motor if the door is opened during operation or in the event of a power failure.</li><li>Waterproof on/off switch.</li></ul><p>High-powered for high performance, the 3/4 HP Wet Model Trimmer will withstand years of rigorous use.</p><p>*Also Includes: Electric Water Valve, Splash Shield and Water Spray Attachment.</p></div><div><h3>Technical Specifications</h3><dl><dt>Dimensions</dt><dd>15"W x 15.25"H x 19"D</dd><dt>Voltage</dt><dd>115V/60Hz</dd><dt>Weight</dt><dd>28.3 kg (62.45 lbs)</dd><dt>Amperage</dt><dd>4A</dd><dt>Drive Motor</dt><dd>1,800 RPM 3/4HP</dd><dt>Warranty</dt><dd>3 year parts and labor (US & Canada Only)</dd></dl></div>

<h2>10" Model Trimmer</h2><p>Ray Foster Model Trimmers are constructed from heavy gauge cast aluminum with stainless steel and solid brass fittings. The machines are finished, inside and out, with a high gloss white epoxy coating that offers durability, corrosion resistance, and a very attractive finish. Resiliently mounted and precision balanced for smooth, quiet operation, they are designed to assure years of service free performance under the most demanding laboratory use. The Ray Foster Model Trimmers are the original "swinging door" trimmer and is the benchmark by which other model trimmers are measured.</p><h4>Model MT10</h4><p>The MT10 offers all the features of the MT12 in a compact design. It is the ideal fit in the close quarters of a doctor's office laboratory, and also performs very well in the demanding environment of a commercial laboratory.</p><h5>Specifications</h5><ul> <li>1/3 HP motor, with 1.35 service factor producing .45 HP actual power</li> <li>10" diameter, 1/4" thick grinding wheel</li> <li>4" wide, 4-1/4" high cutting surface</li> <li>14" high, 14" wide, 15" deep</li> <li>115 volt, 60 Hz standard or 230 volt, 50/60 Hz optional for export</li> <li>Net weight 32 lbs, shipping weight 38 lbs</li> </ul>

<h2>10" Model Trimmer</h2><p>Ray Foster Model Trimmers are constructed from heavy gauge cast aluminum with stainless steel and solid brass fittings. The machines are finished, inside and out, with a high gloss white epoxy coating that offers durability, corrosion resistance, and a very attractive finish. Resiliently mounted and precision balanced for smooth, quiet operation, they are designed to assure years of service free performance under the most demanding laboratory use. The Ray Foster Model Trimmers are the original "swinging door" trimmer and is the benchmark by which other model trimmers are measured.</p><h4>Model MT10</h4><p>The MT10 offers all the features of the MT12 in a compact design. It is the ideal fit in the close quarters of a doctor's office laboratory, and also performs very well in the demanding environment of a commercial laboratory.</p><h5>Specifications</h5><ul> <li>1/3 HP motor, with 1.35 service factor producing .45 HP actual power</li> <li>10" diameter, 1/4" thick grinding wheel</li> <li>4" wide, 4-1/4" high cutting surface</li> <li>14" high, 14" wide, 15" deep</li> <li>115 volt, 60 Hz standard or 230 volt, 50/60 Hz optional for export</li> <li>Net weight 32 lbs, shipping weight 38 lbs</li> </ul>

<h2>10" Model Trimmer</h2><p>Ray Foster Model Trimmers are constructed from heavy gauge cast aluminum with stainless steel and solid brass fittings. The machines are finished, inside and out, with a high gloss white epoxy coating that offers durability, corrosion resistance, and a very attractive finish. Resiliently mounted and precision balanced for smooth, quiet operation, they are designed to assure years of service free performance under the most demanding laboratory use. The Ray Foster Model Trimmers are the original "swinging door" trimmer and is the benchmark by which other model trimmers are measured.</p><h4>Model MT10</h4><p>The MT10 offers all the features of the MT12 in a compact design. It is the ideal fit in the close quarters of a doctor's office laboratory, and also performs very well in the demanding environment of a commercial laboratory.</p><h5>Specifications</h5><ul> <li>1/3 HP motor, with 1.35 service factor producing .45 HP actual power</li> <li>10" diameter, 1/4" thick grinding wheel</li> <li>4" wide, 4-1/4" high cutting surface</li> <li>14" high, 14" wide, 15" deep</li> <li>115 volt, 60 Hz standard or 230 volt, 50/60 Hz optional for export</li> <li>Net weight 32 lbs, shipping weight 38 lbs</li> </ul>

<h2>10" Model Trimmer</h2><p>Ray Foster Model Trimmers are constructed from heavy gauge cast aluminum with stainless steel and solid brass fittings. The machines are finished, inside and out, with a high gloss white epoxy coating that offers durability, corrosion resistance, and a very attractive finish. Resiliently mounted and precision balanced for smooth, quiet operation, they are designed to assure years of service free performance under the most demanding laboratory use. The Ray Foster Model Trimmers are the original "swinging door" trimmer and is the benchmark by which other model trimmers are measured.</p><h4>Model MT10</h4><p>The MT10 offers all the features of the MT12 in a compact design. It is the ideal fit in the close quarters of a doctor's office laboratory, and also performs very well in the demanding environment of a commercial laboratory.</p><h5>Specifications</h5><ul> <li>1/3 HP motor, with 1.35 service factor producing .45 HP actual power</li> <li>10" diameter, 1/4" thick grinding wheel</li> <li>4" wide, 4-1/4" high cutting surface</li> <li>14" high, 14" wide, 15" deep</li> <li>115 volt, 60 Hz standard or 230 volt, 50/60 Hz optional for export</li> <li>Net weight 32 lbs, shipping weight 38 lbs</li> </ul>

<div> <h2>12" Model Trimmer</h2><p>Ray Foster Model Trimmers are constructed from heavy gauge cast aluminum with stainless steel and solid brass fittings. The machines are finished, inside and out, with a high gloss white epoxy coating that offers durability, corrosion resistance, and a very attractive finish. Resiliently mounted and precision balanced for smooth, quiet operation, they are designed to assure years of service free performance under the most demanding laboratory use. The Ray Foster Model Trimmers are the original "swinging door" trimmer and is the benchmark by which other model trimmers are measured.</p><h5>Model MT12</h5><ul> <li>Heavy-duty, capacitor start ball bearing motor</li> <li>Adjustable work table – Full radius water spray</li> <li>Reversible grinding wheel – Hinged door secured by single knob</li> <li>Optional automatic water valve – Motor is UL recognized and CSA certified for electrical safety</li> </ul><h5>Specifications</h5><ul> <li>1/2 HP motor, with 1.25 service factor producing .625 HP actual power</li> <li>12" diameter, 1/4" thick grinding wheel</li> <li>5-1/4" wide, 5" high cutting surface</li> <li>17" high, 17" wide, 16" deep</li> <li>115 volt, 60 Hz standard or 230 volt, 50/60 Hz optional for export</li> <li>Net weight 41 lbs, shipping weight 49 lbs</li> </ul> </div>

<div> <h2>12" Model Trimmer</h2><p>Ray Foster Model Trimmers are constructed from heavy gauge cast aluminum with stainless steel and solid brass fittings. The machines are finished, inside and out, with a high gloss white epoxy coating that offers durability, corrosion resistance, and a very attractive finish. Resiliently mounted and precision balanced for smooth, quiet operation, they are designed to assure years of service free performance under the most demanding laboratory use. The Ray Foster Model Trimmers are the original "swinging door" trimmer and is the benchmark by which other model trimmers are measured.</p><h5>Model MT12</h5><ul> <li>Heavy-duty, capacitor start ball bearing motor</li> <li>Adjustable work table – Full radius water spray</li> <li>Reversible grinding wheel – Hinged door secured by single knob</li> <li>Optional automatic water valve – Motor is UL recognized and CSA certified for electrical safety</li> </ul><h5>Specifications</h5><ul> <li>1/2 HP motor, with 1.25 service factor producing .625 HP actual power</li> <li>12" diameter, 1/4" thick grinding wheel</li> <li>5-1/4" wide, 5" high cutting surface</li> <li>17" high, 17" wide, 16" deep</li> <li>115 volt, 60 Hz standard or 230 volt, 50/60 Hz optional for export</li> <li>Net weight 41 lbs, shipping weight 49 lbs</li> </ul> </div>

<h2>12" Model Trimmer</h2><p>Ray Foster Model Trimmers are constructed from heavy gauge cast aluminum with stainless steel and solid brass fittings. The machines are finished, inside and out, with a high gloss white epoxy coating that offers durability, corrosion resistance, and a very attractive finish. Resiliently mounted and precision balanced for smooth, quiet operation, they are designed to assure years of service free performance under the most demanding laboratory use. The Ray Foster Model Trimmers are the original "swinging door" trimmer and is the benchmark by which other model trimmers are measured.</p><h5>Model MT12</h5><ul> <li>Heavy-duty, capacitor start ball bearing motor</li> <li>Adjustable work table – Full radius water spray</li> <li>Reversible grinding wheel – Hinged door secured by single knob</li> <li>Optional automatic water valve – Motor is UL recognized and CSA certified for electrical safety</li> </ul><h5>Specifications</h5><ul> <li>1/2 HP motor, with 1.25 service factor producing .625 HP actual power</li> <li>12" diameter, 1/4" thick grinding wheel</li> <li>5-1/4" wide, 5" high cutting surface</li> <li>17" high, 17" wide, 16" deep</li> <li>115 volt, 60 Hz standard or 230 volt, 50/60 Hz optional for export</li> <li>Net weight 41 lbs, shipping weight 49 lbs</li> </ul>

<div> <h2>12" Model Trimmer</h2><p>Ray Foster Model Trimmers are constructed from heavy gauge cast aluminum with stainless steel and solid brass fittings. The machines are finished, inside and out, with a high gloss white epoxy coating that offers durability, corrosion resistance, and a very attractive finish. Resiliently mounted and precision balanced for smooth, quiet operation, they are designed to assure years of service free performance under the most demanding laboratory use. The Ray Foster Model Trimmers are the original "swinging door" trimmer and is the benchmark by which other model trimmers are measured.</p><h5>Model MT12</h5><ul> <li>Heavy-duty, capacitor start ball bearing motor</li> <li>Adjustable work table – Full radius water spray</li> <li>Reversible grinding wheel – Hinged door secured by single knob</li> <li>Optional automatic water valve – Motor is UL recognized and CSA certified for electrical safety</li> </ul><h5>Specifications</h5><ul> <li>1/2 HP motor, with 1.25 service factor producing .625 HP actual power</li> <li>12" diameter, 1/4" thick grinding wheel</li> <li>5-1/4" wide, 5" high cutting surface</li> <li>17" high, 17" wide, 16" deep</li> <li>115 volt, 60 Hz standard or 230 volt, 50/60 Hz optional for export</li> <li>Net weight 41 lbs, shipping weight 49 lbs</li> </ul> </div>