<div><p>Our Flannel Buffs are made of high-quality flannel and are virtually lint free. Use these buffs with a fine rouge to produce a final high luster on gold or acrylic. The 20-ply buffs also can be used as a wipe off wheel without composition.</p><p><strong>Features:</strong><br />
– 20-Ply<br />
– Available Sizes: 3”, 4”<br />
– Sold individually</p></div><div><div><p>Our Flannel Buffs are made of high-quality flannel and are virtually lint free. Use these buffs with a fine rouge to produce a final high luster on gold or acrylic. The 20-ply buffs also can be used as a wipe off wheel without composition.</p><p><strong>Features:</strong><br />
– 20-Ply<br />
– Available Sizes: 3”, 4”<br />
– Sold individually</p></div>
$4.95
<h2>Hatho Poly Buffs</h2><p>The exterior of Hatho Poly Buffs consists of specially selected Chung King bristles which guarantee long life and high quality polishing. These brushes are wrapped around a core of grit-free, soft Scotch Brite and fine muslin cloth. These buffs retain pumice inside the disc material exceptionally well.</p><p>The characteristics of the valued Chung King bristles are complemented by the buffing materials to achieve optimum polishing properties. The properties make these brushes ideal for wet and dry polishing. The core is made from wood encased in plastic, allowing for easy mounting and dismounting.</p></div>
$6.40
<div><p>These Green Grinding Wheels are specially suited for grinding porcelain teeth. The long-lasting discs will not wear or chip porcelain. The wheels have 1/4” (6.35 mm) lead reinforced center hole and comes in 120 grit.</p><p><strong>Features:</strong><br />
– Available in 120 grit<br />
– 1/4″ lead reinforced center hole<br />
– Available Sizes: 2 1/2″ X 1/4″ (63.5 x 6.35 mm), 3″ x 1/4″ (76 x 6.35 mm), 3″ X 3/8″ (76 x 9.5 mm)<br />
– Sold individually</p></div><div><div><p>These Green Grinding Wheels are specially suited for grinding porcelain teeth. The long-lasting discs will not wear or chip porcelain. The wheels have 1/4” (6.35 mm) lead reinforced center hole and comes in 120 grit.</p><p><strong>Features:</strong><br />
– Available in 120 grit<br />
– 1/4″ lead reinforced center hole<br />
– Available Sizes: 2 1/2″ X 1/4″ (63.5 x 6.35 mm), 3″ x 1/4″ (76 x 6.35 mm), 3″ X 3/8″ (76 x 9.5 mm)<br />
– Sold individually</p></div>
$8.25
<div><p>These Green Grinding Wheels are specially suited for grinding porcelain teeth. The long-lasting discs will not wear or chip porcelain. The wheels have 1/4” (6.35 mm) lead reinforced center hole and comes in 120 grit.</p><p><strong>Features:</strong><br />
– Available in 120 grit<br />
– 1/4″ lead reinforced center hole<br />
– Available Sizes: 2 1/2″ X 1/4″ (63.5 x 6.35 mm), 3″ x 1/4″ (76 x 6.35 mm), 3″ X 3/8″ (76 x 9.5 mm)<br />
– Sold individually</p></div><div><div><p>These Green Grinding Wheels are specially suited for grinding porcelain teeth. The long-lasting discs will not wear or chip porcelain. The wheels have 1/4” (6.35 mm) lead reinforced center hole and comes in 120 grit.</p><p><strong>Features:</strong><br />
– Available in 120 grit<br />
– 1/4″ lead reinforced center hole<br />
– Available Sizes: 2 1/2″ X 1/4″ (63.5 x 6.35 mm), 3″ x 1/4″ (76 x 6.35 mm), 3″ X 3/8″ (76 x 9.5 mm)<br />
– Sold individually</p></div>
$9.75
<div><p>These Green Grinding Wheels are specially suited for grinding porcelain teeth. The long-lasting discs will not wear or chip porcelain. The wheels have 1/4” (6.35 mm) lead reinforced center hole and comes in 120 grit.</p><p><strong>Features:</strong><br />
– Available in 120 grit<br />
– 1/4″ lead reinforced center hole<br />
– Available Sizes: 2 1/2″ X 1/4″ (63.5 x 6.35 mm), 3″ x 1/4″ (76 x 6.35 mm), 3″ X 3/8″ (76 x 9.5 mm)<br />
– Sold individually</p></div><div><div><p>These Green Grinding Wheels are specially suited for grinding porcelain teeth. The long-lasting discs will not wear or chip porcelain. The wheels have 1/4” (6.35 mm) lead reinforced center hole and comes in 120 grit.</p><p><strong>Features:</strong><br />
– Available in 120 grit<br />
– 1/4″ lead reinforced center hole<br />
– Available Sizes: 2 1/2″ X 1/4″ (63.5 x 6.35 mm), 3″ x 1/4″ (76 x 6.35 mm), 3″ X 3/8″ (76 x 9.5 mm)<br />
– Sold individually</p></div>
$10.80
<div><p>These White Acrylic Knock-down Wheels are developed for trimming base plates, acrylic, and stone models. The aluminum oxide grit facilitates rapid shaping with minimum pressure. The wheels generate little heat and will not clog.</p><p><strong>Features:</strong><br />
– Made of aluminum oxide<br />
– Wheels have 1/4” (6.35 mm) lead reinforced center hold<br />
– 36-46 grit<br />
– Available Sizes: 3″ X 3/8″ (76 x 9.5 mm) , 4″ X 1/2″ (101 x 12.7 mm)<br />
– Sold individually</p><p> </p></div><div><div><p>These White Acrylic Knock-down Wheels are developed for trimming base plates, acrylic, and stone models. The aluminum oxide grit facilitates rapid shaping with minimum pressure. The wheels generate little heat and will not clog.</p><p><strong>Features:</strong><br />
– Made of aluminum oxide<br />
– Wheels have 1/4” (6.35 mm) lead reinforced center hold<br />
– 36-46 grit<br />
– Available Sizes: 3″ X 3/8″ (76 x 9.5 mm) , 4″ X 1/2″ (101 x 12.7 mm)<br />
– Sold individually</p><p> </p></div>
$11.15
<div><p>The Rubber Acrylic and Baseplate Wheel is a coarse grit, rubber bonded wheel. The wheel is excellent for grinding acrylic at normal lathe speed and for baseplates at low speed.</p><p><strong>Features:</strong><br />
– Coarse grit<br />
– Available Size: 3″x3/8″ (76 x 9.5mm)<br />
– Sold individually</p></div><div><div><p>The Rubber Acrylic and Baseplate Wheel is a coarse grit, rubber bonded wheel. The wheel is excellent for grinding acrylic at normal lathe speed and for baseplates at low speed.</p><p><strong>Features:</strong><br />
– Coarse grit<br />
– Available Size: 3″x3/8″ (76 x 9.5mm)<br />
– Sold individually</p></div>
$11.20
<div><p>Made of steel, these Tapered Spindles are designed to be used with buffing wheels, brushes, and centered wheels. The chuck is built for placement on either right or left hand shafts with 3/8” or standard tapered shaft. Sold individually.</p></div><div><div><p>Made of steel, these Tapered Spindles are designed to be used with buffing wheels, brushes, and centered wheels. The chuck is built for placement on either right or left hand shafts with 3/8” or standard tapered shaft. Sold individually.</p></div>
$11.90
<div><p>These Red Engine Wheels are made of aluminum oxide grit that performs a superior job on chrome or gold. The wheels come in square edge and knife edge in 7/8” (22.2 mm) diameter or 5/8” (15.8 mm) diameters.</p><p><strong>Features:</strong><br />
– Made of aluminum oxide<br />
– Available in square edge and knife edge<br />
– Available in 7/8” (22.2 mm) and 5/8” (15.8 mm) diameters<br />
– Available in 12/Pk</p><p> </p></div><div><div><p>These Red Engine Wheels are made of aluminum oxide grit that performs a superior job on chrome or gold. The wheels come in square edge and knife edge in 7/8” (22.2 mm) diameter or 5/8” (15.8 mm) diameters.</p><p><strong>Features:</strong><br />
– Made of aluminum oxide<br />
– Available in square edge and knife edge<br />
– Available in 7/8” (22.2 mm) and 5/8” (15.8 mm) diameters<br />
– Available in 12/Pk</p><p> </p></div>
$12.65
<div><p>Made of steel, these Tapered Spindles are designed to be used with buffing wheels, brushes, and centered wheels. The chuck is built for placement on either right or left hand shafts with 3/8” or standard tapered shaft. Sold individually.</p></div><div><div><p>Made of steel, these Tapered Spindles are designed to be used with buffing wheels, brushes, and centered wheels. The chuck is built for placement on either right or left hand shafts with 3/8” or standard tapered shaft. Sold individually.</p></div>
$13.05
-250x250.jpg)
KEYSTONE 
3D DENTAL
ORTHOPLI
Handler Manufacturing
OrthoEssentials
Ray Foster Dental Equipment
ORTHO TECHNOLOGY
The Orthodontic Store
DENTAURUM Inc.
